Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine Controller OPEL CORSA 1.8 Z18XE SIEMENS 5WK9155 9115113
Vendors's code:
Product code: 706D-171C8
Barcode:
Code 39:
ISBN:
€487.80
Price
€487.80
without VAT
Regular price:
€487.80
-0%
€600.00
Price
€600.00
Regular price:
€600.00
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller OPEL CORSA 1.8 Z18XE SIEMENS 5WK9155 9115113
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What is the Ecu engine controller Opel Corsa 1.8 Z18XE 5WK9155?
The Ecu engine controller 5WK9155 in Opel Corsa 1.8 Z18XE Siemens is an electronic unit responsible for proper engine operation. It controls vehicle start-up, ensures stable engine performance, and maintains correct engine parameters during driving.
How does the engine controller 9115113 work?
The engine controller 9115113 processes data from vehicle sensors and manages engine operation. Thanks to it, the engine runs evenly, maintains correct parameters, and responds smoothly in various driving conditions.
Do the numbers 5WK9155 and 9115113 refer to the same controller?
Yes, the designations 5WK9155 and 9115113 refer to the same Ecu engine controller for Opel Corsa 1.8 Z18XE. Differences only come from manufacturer codes; the function remains identical.
Which Opel Corsa models is the 5WK9155 controller compatible with?
The controller 5WK9155 is used in Opel Corsa 1.8 Z18XE with engines compatible with this module. If this number is on your controller, it ensures full compatibility with the engine and vehicle electronics.
Is the engine controller 9115113 available in different variants?
Yes, the engine controller 9115113 is available in two variants: standard version and IMMO OFF. Before purchase, check the variant description to select the correct option for your vehicle.
When should the 5WK9155 Ecu engine controller be replaced?
Replacement of 5WK9155 is recommended when there are problems starting the vehicle, uneven engine performance, or electronic faults. A functional controller restores driving comfort and safety.
Why is the 9115113 controller number important?
The number 9115113 allows precise matching of the controller to the Opel Corsa 1.8 Z18XE Siemens engine version. Correct part number compatibility is crucial for proper operation and trouble-free installation.
