+48 501 409 435
+32 201 72 96
pon- pt 9:00 - 17:00
ECU ENGINE CONTROLLER ecu engine control module
Our offer includes vehicle module programming KOMPUTER STEROWNIK SILNIKA FORD FIESTA 1.1, 88FB-12A650-AC, 88FB12A650AC depending on the ecu type it can be programmed in a variety of ways. it may be possible though that not all the options are available for a particular ecu type. please don't hesitate to contact us and we'll do our best to find a convenient solution to address your problem.
Before purchasing, please carefully compare the numbers on the sticker of the engine controller,for the proper functioning of this controller these numbers must match!
CHOOSE VARIANT ECU ENGINE CONTROLLER
1.Locked: engine computer removed from the car destined for the recycling with data stored from the previous car immobilizer. In order to fit the driver to re-install prepare it by logging and re-programming. For this purpose it is necessary interference with electronics specialist diagnostic equipment.
2.Unlocked: before buying, please contact with us as far as possible to prepare the computer , because, depending on the make and model of the car and the opportunities are in the type of driver, the computer can be ready for installation by our electronics in different ways:
a) With fixed pin code (CAR PASS) from the previous car, so that by means of the diagnostic device when connected ecu to car you need reset the computer, then enter the pin code of the car in which the driver to install the program it with immobilizer.
b) Clean ecu. Ecu with a clean security pin code (CAR PASS) , after connected ecu to the car must be programmed it by special diagnostic device by introducing pin code of the car in which this you are installing to program with an immobilizer.
c)Plug & Play - excluded immobilizer, they have removed safety codes from the ecu , after connected ecu to the car , engine runs , do not require any programming, but does not have the immobilizer function.
d) Plug & Play - By automatically adding the code, after connected computer to your car engine automatically installs security code
No need for additional programming.
e) Plug & Play - Cloned computer has made through our electronic data from the car in which it will be installed.To prepare the computer you must send us the damaged driver which will be transferred to secure data to proper functioning computer
(Must be provided faulty driver communication with the car or diagnostic device , without proper communication can not be cloned Security code).
3.Complete: complete, computer engine with immobilizer and all the elements needed to start the vehicle without need for additional programming.
WYSYŁKA, ODBIÓR OSOBISTY LUB MONTAŻ CZĘŚCI KOMPUTER STEROWNIK SILNIKA FORD FIESTA 1.1, 88FB-12A650-AC, 88FB12A650AC W NASZYM WARSZTACIE
KONTAKT DO WARSZTATU: 32 201 72 96 LUB 501 409 435
KOSZT WYSYŁKI - DO 30 KG:
- Przesyłka kurierska (wpłata na konto): 20zł
- Przesyłka kurierska (pobraniowa): 25zł
ODBIÓR OSOBISTY (części: KOMPUTER STEROWNIK SILNIKA FORD FIESTA 1.1, 88FB-12A650-AC, 88FB12A650AC ):
- ADRES: ul. Mikusińskiego 33, 40-146 Katowice
- TEL: 501 409 435 lub 32 201 72 96