A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Land Rover 4460440300 332464
Vendors's code: 4460440300
Product code: B8FF-202EA
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
Ask about the product
ABS control unit Land Rover 4460440300 332464
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether the control unit fits your Land Rover?
This is a used, working ABS control unit for Land Rover, numbers 446 044 030 0 / 4460440300; 332464. Before buying, compare the numbers with the label on the control unit in your car.
ABS control unit Land Rover
If the ABS warning light is on in your Land Rover or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 446 044 030 0 / 4460440300 - part number
- 332464 - additional part number
Application according to the listing
- Land Rover - model
- 4.6 V8 - engine according to the listing
What the control unit does
In older cars the ABS control unit is often a separate module, in newer ones it is joined to the hydraulic unit. This listing covers the control unit named in the title; we will confirm the scope on request.
Fitment
We also have other control units for this model with different numbers. Choose by the number on the label, not by the model alone.
Symptoms of a faulty control unit
- the ABS light comes on right after starting the engine,
- the diagnostic tool cannot connect to the module,
- the speedometer shows wrong values (if it uses ABS signals),
- the system works only from time to time.
Before buying, make sure the cause is not the power supply or wiring, and only then replace the control unit.
Questions and answers
| What condition is the part in? |
|---|
| It is a used, working part in good condition, covered by a 6-month warranty. |
| Where is the number on the control unit? |
| The number is on the label or housing of the control unit, visible after removing it from the car. If you cannot read it, send us a photo. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.
