Hyundai ABS Pumps – Complete ABS / ESP Units

Hyundai ABS Pump: Hydraulic Module with ABS Control Unit

An ABS pump in a Hyundai is an aluminium hydraulic block with valves and a pump motor, together with a control unit that reads the signals from the wheel speed sensors. On many models the same module also handles the stability control system, so a fault sometimes shows up as more than just the ABS warning light. The module is usually sold and replaced as a single unit.

Our range includes more than eighty used original modules. Among them you will find original numbers beginning with 58 and the numbers of the manufacturers Mando, Mobis, Bosch and ATE, as well as additional numbers from the listings. The range changes regularly, so the items below are only examples.

Hyundai Accent, Getz and Atos Prime ABS Pump

For the smaller models our range includes, among others:

• Hyundai Accent ABS pump, number 5891025402,
• Hyundai Accent ABS pump, number 589201G000,
• Hyundai Getz ABS pump, number 589101C800,
• Hyundai Getz ABS pump, number 589101C310,
• Hyundai Atos Prime ABS pump, number 5891002800.

Hyundai i10, i30, Santa Fe and Ioniq ABS Pump

For the other models our range includes, among others:

• Hyundai i10 Kia ABS pump, number 589100X500,
• Hyundai i10 ABS pump, number 589100X510,
• Hyundai i30 ABS pump, number 589202L500,
• Hyundai i30 ABS pump, number 589202L320,
• Hyundai Santa Fe ABS pump, number 5890026050,
• Hyundai Ioniq ABS pump, number 58500G2710.

Hyundai ABS pump: Mando modules

Most of the listings do not state the car model. The Mando modules in our range include, among others:

• Hyundai ABS pump, number 589100X550,
• Hyundai ABS pump, number 58920D7910,
• Hyundai ABS pump, number 58920F1510,
• Hyundai ABS pump, number 589203Z600,
• Hyundai ABS pump, number 589201R260,
• Hyundai ABS pump, number 589202V250,
• Hyundai ABS pump, number 589204H860.

Hyundai ABS pump: Mobis modules

The Mobis modules in our range include, among others:

• Hyundai ABS pump, number 589101J275,
• Hyundai ABS pump, number 58920F2500,
• Hyundai ABS pump, number 58920C8390,
• Hyundai ABS pump, number 589001J270,
• Hyundai ABS pump, number 589203X610.

Hyundai ABS pump: Bosch and ATE modules

The Bosch and ATE modules in our range include, among others:

• Hyundai ABS pump, number 589102B300,
• Hyundai ABS pump, number 58900J9000,
• Hyundai ABS pump, number 58900B9800,
• Hyundai ABS pump, number 58900B4800.

Modules shared by Hyundai and Kia

Some of the listings describe a module as shared by Hyundai and Kia, for example:

• Hyundai Kia ABS pump, number 589203C500,
• Hyundai Kia ABS pump, number 58920JK250,
• Hyundai Kia ABS pump, number 589200Z650,
• Hyundai Kia ABS pump, number 58910H8400,
• Hyundai Kia ABS pump, number 58900A7210,
• Hyundai Kia ABS pump, number 58500CZ100,
• Hyundai Kia ABS pump, number 589101Y800.

Other modules

Our range also includes modules that state neither a manufacturer nor an original number, for example Hyundai ABS pump, number 58500G2400 and Hyundai ABS pump, number BH60161A03. The listings do not always state the model and year of the car, so compatibility depends on the number from the original pump.

How to choose an ABS pump for a Hyundai by part number

Model and year are not enough, because the same model comes with different versions of the module, depending on the engine, drive and equipment level. In our range you will find several kinds of numbers:

• the original Hyundai number, beginning with 58, for example 589202L500 or 58920-D7101 (in catalogues also written without a hyphen),
• the manufacturer's number for the hydraulic block, if one is given in the listing, for example Bosch 0 265 2xx xxx or ATE 06.2109-xxxx.x,
• additional numbers from the listing, for example BH60103700, BE6003R100 or 5WY7209A.

Compare all the numbers with the original pump in your car and, if in doubt, write to us before buying.

Symptoms of a faulty ABS pump or control unit

• the ABS warning light comes on after the engine is started and does not go out,
• the ABS stops working, although basic braking usually remains functional,
• the brake pedal pulses or feels uneven for no obvious reason,
• the control unit stores valve, pump motor or communication faults,
• brake fluid leaks from the hydraulic block, which requires immediate action.

Before deciding on a replacement, check the wheel speed sensors, their wiring and the supply voltage. After replacing the module, the fault codes usually need to be cleared, and after disconnecting the brake lines the system must be bled. On some models the module also needs adaptation in the control unit, so installation is best left to a workshop with a suitable diagnostic scanner.

Used original ABS module: condition and inspection

We sell used original ABS modules, not new parts. Every item is inspected and tested before sale, and the product photos show the look of the block, the numbers and the labels, so you can compare them with your own pump.

Related electronic parts

If you are looking for other modules, see ABS / ESP / ASR control units and electronic car parts.

Ordering, Payment, Delivery and Warranty

Information about placing an order is available on the How to Buy page. The available payment methods are described under Payment Methods, while shipping information can be found on the Shipping and Delivery page.

Our rules on returns, complaints and warranty are set out on the Returns, Warranty and Complaints page. Further answers are also available in the Auto24Parts FAQ.

FAQ: Hyundai ABS Pump