Ford ABS Pumps – Complete ABS / ESP Units

Ford ABS Pump: Hydraulic Module with ABS Control Unit

An ABS pump in a Ford is an aluminium hydraulic block with valves and a pump motor, together with a control unit that reads the signals from the wheel speed sensors. On many models the same module also handles the stability control system, so a fault sometimes shows up as more than just the ABS warning light. The module is usually sold and replaced as a single unit.

Our range includes several dozen used original modules for various Ford models. Among them you will find Ford numbers, as well as Bosch (0 265 ...) and ATE (10.02..., 10.09..., 06.21...) manufacturer numbers. The range changes regularly, so the items below are only examples.

Ford Fiesta and Fusion ABS Pump

For the smaller models our range includes, among others:

• Ford Fiesta Fusion ABS pump, number 4S612M110DA,
• Ford Fiesta ABS pump, number 8V512C405AE,
• Ford Ka ABS pump, number 0265230281.

Ford Focus and Transit ABS Pump

For the Focus and Transit models we have modules with ATE numbers, for example:

• Ford Focus Transit ABS pump, number 2M512M110EE,
• Ford Focus ABS pump, number 3M512C405HA.

Ford Mondeo, Galaxy and S-Max ABS Pump

For the larger models our range includes, among others:

• Ford Mondeo ABS pump, number F6RF2C219CA,
• Ford Mondeo ABS pump, number 3S712C405AC,
• Ford Galaxy S-Max ABS pump, number 6G912M110AH.

Ford Kuga, Ranger and Edge ABS Pump

For Ford's SUVs and pick-up truck we have, among others, the following modules:

• Ford Kuga ABS pump, number AV412C405AA,
• Ford Kuga ABS pump, number LX6C2D335MP,
• Ford Ranger ABS pump, number AB312C405AE,
• Ford Edge ABS pump, number 9T432D063AA.

Modules shared by Ford and Mazda, and modules with no model stated

Individual listings describe a module as shared by Ford and Mazda, for example Ford Mazda ABS pump, number 3M512M110CA. Our range also includes modules where the model is not stated, for example Ford ABS pump, number AB312C405AF. Our listings do not always state the car model, so compatibility depends on the number from the original pump.

How to choose an ABS pump for a Ford by part number

Model and year are not enough, because the same model comes with different versions of the module, depending on the engine, drive and equipment level. In our range you will find several kinds of numbers:

• the original Ford number, most often containing 2C405, 2B373, 2C219 or 2M110, for example AB31-2C405-AE or LX6C-2B373-CM (in catalogues also written without hyphens),
• the manufacturer's number for the hydraulic block, for example Bosch 0 265 2xx xxx or ATE 10.02xx-xxxx.x,
• the control unit number, for example Bosch 0 265 9xx xxx or ATE 10.09xx-xxxx.x.

Compare all the numbers with the original pump in your car and, if in doubt, write to us before buying.

Symptoms of a faulty ABS pump or control unit

• the ABS warning light comes on after the engine is started and does not go out,
• the ABS stops working, although basic braking usually remains functional,
• the brake pedal pulses or feels uneven for no obvious reason,
• the control unit stores valve, pump motor or communication faults,
• brake fluid leaks from the hydraulic block, which requires immediate action.

Before deciding on a replacement, check the wheel speed sensors, their wiring and the supply voltage. After replacing the module, the fault codes usually need to be cleared, and after disconnecting the brake lines the system must be bled. On some models the module also needs adaptation in the control unit, so installation is best left to a workshop with a suitable diagnostic scanner.

Used original ABS module: condition and inspection

We sell used original ABS modules, not new parts. Every item is inspected and tested before sale, and the product photos show the look of the block, the numbers and the labels, so you can compare them with your own pump.

Related electronic parts

If you are looking for other modules, see ABS / ESP / ASR control units and electronic car parts.

Ordering, Payment, Delivery and Warranty

Information about placing an order is available on the How to Buy page. The available payment methods are described under Payment Methods, while shipping information can be found on the Shipping and Delivery page.

Our rules on returns, complaints and warranty are set out on the Returns, Warranty and Complaints page. Further answers are also available in the Auto24Parts FAQ.

FAQ: Ford ABS Pump