A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Ford Ka 1.3 Bosch 51823789 0265232236 0265800791
Vendors's code: 51823789
Product code: 0265232236
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump Ford Ka 1.3 Bosch 51823789 0265232236 0265800791
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump 51823789 fit your Ford?
ABS pump 51823789 complete with control unit, used and inspected. Compare the numbers with the original in your car.
Ford Ka 1.3 ABS pump: numbers 51823789 and 0265232236
ABS pump 51823789 for Ford Ka 1.3 is a used original module that regulates brake pressure when a wheel starts to lock up. It is matched by the numbers on its labels, not by the car model alone. According to the listing, the pump comes from the Ford Ka 1.3 model.
Numbers to compare
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 51823789, original Ford number,
- 0 265 232 236 (catalogue format: 0265232236), hydraulic block manufacturer's number,
- 0 265 800 791 (catalogue format: 0265800791), control unit number.
Matching by number is more reliable than matching by car model. Compare all the numbers and ask us if any of them does not match.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Where do I find number 51823789 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
