A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Chrysler Jeep ATE P68402396AD 00534792760 28515904253
Vendors's code: P68402396AD
Product code: 28515904253
Barcode:
Code 39:
ISBN:
813,01 zł
Price
813,01 zł
1 000,00 zł
Price
1 000,00 zł
Ask about the product
ABS pump and control module Chrysler Jeep ATE P68402396AD 00534792760 28515904253
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Why does ABS unit P68402396AD come with three numbers?
A used, working, genuine unit: an ABS pump with control unit from a Chrysler or Jeep car. The listing carries part number (OEM) P68402396AD, reference 00534792760 and ATE number 28.5159-0425.3. We do not state the model.
P68402396AD, 00534792760, ATE 28.5159-0425.3 - ABS pump for Chrysler and Jeep
A workshop rule: the more matching numbers, the lower the risk of a mistake. This listing gives you three reference points. P68402396AD is the part number (OEM), 28.5159-0425.3 is the ATE number, and 00534792760 is an additional reference given in the listing. The ABS unit with pump and control unit is used, working and genuine, from a Chrysler or Jeep car.
Three numbers to check
- P68402396AD - OEM part number: P68402396AD
- 00534792760 - additional reference given in the listing: 00534792760
- 28515904253 - ATE number: 28.5159-0425.3
We do not say which number refers to the pump and which to the control unit. Compare them all: the more references that match your part, the better.
Typical reasons for replacement
A mechanic comes back to the ABS unit when:
- the ABS warning light does not go out after a restart,
- the scanner shows a pump or control unit fault,
- ABS does not work under hard braking,
- the module reports a fault every time the car is started.
Do not replace the part “blindly”. Read the fault codes, check the wheel sensors and wiring harness, and after replacement bleed the brakes and, if needed, configure the module with a scanner.
What else is worth knowing
| Is a match on one of the three numbers enough? |
|---|
| It is better to compare all of them. The main one is the part number (OEM) P68402396AD, and the others help to confirm the version. |
| What is 00534792760? |
| It is an additional reference given in the listing. We do not claim which component it belongs to. |
| Do you know which model the unit comes from? |
| We know only the brand: Chrysler or Jeep. We do not state the model. |
| Is the part fully functional? |
| It is used, working and genuine. The warranty is described in the product features table. |
Need confirmation? Write to us with the numbers on your part - we will compare them with P68402396AD.
