A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen C4 Peugeot 307 9649988180 0265234395
Vendors's code: 9649988180
Product code: 0265950517
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Citroen C4 Peugeot 307?
This is a used, working ABS pump with control module for the Citroen C4 Peugeot 307 - numbers 96 499 881 80 / 9649988180; 0 265 234 395 / 0265234395. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen C4 Peugeot 307
According to the listing, this hydraulic unit with electronics fits the Citroen C4 Peugeot 307 (2002-2005). It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 96 499 881 80 / 9649988180 - part number (OEM)
- 0 265 234 395 / 0265234395 - ABS pump number (Bosch)
- 0 265 950 517 / 0265950517 - ABS control module number (Bosch)
Application according to the listing
- Citroen C4 Peugeot 307 - model
- 2002-2005 - year
- Bosch - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
The number 96 499 881 80 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.