A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen C4 Peugeot 307 9649988180 9657352680
Vendors's code: 0265950370
Product code: 0265234144
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Citroen C4 Peugeot 307?
This is a used, working ABS pump with control module for the Citroen C4 Peugeot 307 - numbers 96 499 881 80 / 9649988180; 96 573 526 80 / 9657352680. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen C4 Peugeot 307
For the Citroen C4 Peugeot 307 (2008) we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 96 499 881 80 / 9649988180 - part number (OEM)
- 96 573 526 80 / 9657352680 - part number (OEM)
- 0 265 234 144 / 0265234144 - ABS pump number (Bosch)
- 0 265 950 370 / 0265950370 - ABS control module number (Bosch)
Application according to the listing
- Citroen C4 Peugeot 307 - model
- 2008 - year
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number 96 499 881 80 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.