A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Jumpy Fiat Scudo Peugeot Expert 1401109880 0265232065
Vendors's code: 1401109880
Product code: 1401109880
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Citroen Jumpy Fiat Scudo Peugeot Expert 1401109880 0265232065
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Citroen Jumpy Fiat Scudo Peugeot Expert - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Citroen Jumpy Fiat Scudo Peugeot Expert - numbers 14 011 098 80 / 1401109880; 0 265 232 065 / 0265232065. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Jumpy Fiat Scudo Peugeot Expert
For the Citroen Jumpy Fiat Scudo Peugeot Expert (2007-2012) we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 14 011 098 80 / 1401109880 - part number (OEM)
- 0 265 232 065 / 0265232065 - ABS pump number (Bosch)
- 0 265 800 696 / 0265800696 - ABS control module number (Bosch)
Application according to the listing
- Citroen Jumpy Fiat Scudo Peugeot Expert - model
- 2007-2012 - year
- Bosch - manufacturer
How an ABS pump with control module works
This listing covers three twin vans: the Citroen Jumpy, Fiat Scudo and Peugeot Expert from 2007-2012. Part number 14 011 098 80 is shared by these models, while Bosch marks the pump with 0 265 232 065 and the control unit with 0 265 800 696.
Matching
Compare number 14 011 098 80 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
