A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Peugeot 39181765 0265291454
Vendors's code: 39181765
Product code: 0265291454
Barcode:
Code 39:
ISBN:
£123.33
Price
£123.33
£151.70
Price
£151.70
In stock
Ask about the product
ABS pump and control module Citroen Peugeot 39181765 0265291454
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Citroen Peugeot - what to check before buying?
This is a used, working ABS pump with control module for the Citroen Peugeot - numbers 39181765; 0265291454. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Peugeot
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Citroen Peugeot; the unit is working and in good condition.
Numbers to compare
- 39181765 - part number (OEM)
- 0265291454 - ABS pump number (Bosch)
- 0265956240 - ABS control module number (Bosch)
Application according to the listing
- Citroen Peugeot - model
- Bosch - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
