A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Peugeot 9659136980 10097011493
Vendors's code: 9659136980
Product code: 10097011493
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
1 200,00 zł
Price
1 200,00 zł
Ask about the product
ABS pump and control module Citroen Peugeot 9659136980 10097011493
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Citroen Peugeot?
This is a used, working ABS pump with control module for the Citroen Peugeot - numbers 9659136980; 10.0970-1149.3 / 10097011493. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Peugeot
According to the listing, this hydraulic unit with electronics fits the Citroen Peugeot. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 9659136980 - part number (OEM)
- 10.0970-1149.3 / 10097011493 - ABS control module number (ATE)
Application according to the listing
- Citroen Peugeot - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number 9659136980 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
Customers Also Viewed
-
Price 1 200,00 złPrice 975,61 zł
-
Price 1 000,00 złPrice 813,01 zł
