A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Peugeot 9663703980 10039929744
Vendors's code: 10096011843
Product code: 9663703980
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
In stock
Ask about the product
ABS pump and control module Citroen Peugeot 9663703980 10039929744
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Citroen Peugeot?
This is a used, working ABS pump with control module for the Citroen Peugeot - numbers 9663703980; 10.0399-2974.4 / 10039929744. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Peugeot
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Citroen Peugeot. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 9663703980 - part number (OEM)
- 10.0399-2974.4 / 10039929744 - ABS pump number (ATE)
- 10.0960-1184.3 / 10096011843 - ABS control module number (ATE)
Application according to the listing
- Citroen Peugeot - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
