A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Peugeot 9674663580 0265252509
Vendors's code: 0265952146
Product code: 9674663580
Barcode:
Code 39:
ISBN:
1 138,21 zł
Price
1 138,21 zł
1 400,00 zł
Price
1 400,00 zł
In stock
Ask about the product
ABS pump and control module Citroen Peugeot 9674663580 0265252509
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Citroen Peugeot?
This is a used, working ABS pump with control module for the Citroen Peugeot - numbers 9674663580; 0 265 252 509 / 0265252509. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Peugeot
Looking for a replacement for a faulty ABS pump for the Citroen Peugeot? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 9674663580 - part number (OEM)
- 0 265 252 509 / 0265252509 - ABS pump number (Bosch)
- 0265952146 - ABS control module number (Bosch)
Application according to the listing
- Citroen Peugeot - model
- Bosch - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
The number 9674663580 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
