A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Daewoo Tacuma Chevrolet Malibu Hyundai 18042267 96264655
Vendors's code: 96264655
Product code: 18041751
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Daewoo Tacuma Chevrolet Malibu Hyundai - what to check before buying?
This is a used, working ABS pump with control module for the Daewoo Tacuma Chevrolet Malibu Hyundai - numbers 18042267; 96 264 655 / 96264655. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Daewoo Tacuma Chevrolet Malibu Hyundai
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Daewoo Tacuma Chevrolet Malibu Hyundai; the unit is working and in good condition.
Numbers to compare
- 18042267 - part number (OEM)
- 96 264 655 / 96264655 - part number (OEM)
- 09393419 EE / 09393419EE - part number (OEM)
- 18041751 - part number (OEM)
Application according to the listing
- Daewoo Tacuma Chevrolet Malibu Hyundai - model
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
Compare number 18042267 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.