A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Daihatsu 44510B1140 89540B1140
Vendors's code: 44510B1140
Product code: 89540B1140
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
€400.00
Price
€400.00
In stock
Ask about the product
ABS pump and control module Daihatsu 44510B1140 89540B1140
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 44510B1140 fit your car?
This is a used, working ABS pump with control module for Daihatsu – numbers 44510-B1140 / 44510B1140; 89540B1140. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Daihatsu
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Daihatsu; the unit is working and in good condition.
Numbers to compare
- 44510-B1140 / 44510B1140 – part number (OEM)
- 89540B1140 – part number (OEM)
- 06.2109-0831.3 / 06210908313 – ABS control module number (ATE)
Application according to the listing
- Daihatsu – model
- ATE – manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 44510-B1140 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Send questions about compatibility to contact@auto24parts.com – state the model, year and the number from the module.
