A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Daihatsu Sirion 44510B1011 89540B1010
Vendors's code: 89540B1010
Product code: 06210909293
Barcode:
Code 39:
ISBN:
650,41 zł
Price
650,41 zł
800,00 zł
Price
800,00 zł
In stock
Ask about the product
ABS pump and control module Daihatsu Sirion 44510B1011 89540B1010
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Daihatsu Sirion?
This is a used, working ABS pump with control module for the Daihatsu Sirion – numbers 44510-B1011 / 44510B1011; 89540-B1010 / 89540B1010. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Daihatsu Sirion
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Daihatsu Sirion; the unit is working and in good condition.
Numbers to compare
- 44510-B1011 / 44510B1011 – part number (OEM)
- 89540-B1010 / 89540B1010 – part number (OEM)
- 06.2102-0718.4 / 06210207184 – ABS pump number (ATE)
- 06.2109-0929.3 / 06210909293 – ABS control module number (ATE)
Application according to the listing
- Daihatsu Sirion – model
- ATE – manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
Compare number 44510-B1011 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Write to contact@auto24parts.com with the model, year and the number from your pump – we will check the fit.
