A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Daihatsu Terios 44510B4020 89540B4020
Vendors's code: 89540B4020
Product code: 44510B4020
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
Ask about the product
ABS pump and control module Daihatsu Terios 44510B4020 89540B4020
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Daihatsu Terios?
This is a used, working ABS pump with control module for the Daihatsu Terios – numbers 44510-B4020 / 44510B4020; 89540-B4020 / 89540B4020. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Daihatsu Terios
Looking for a replacement for a faulty ABS pump for the Daihatsu Terios? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 44510-B4020 / 44510B4020 – part number (OEM)
- 89540-B4020 / 89540B4020 – part number (OEM)
- 135110-21030 / 13511021030 – part number (OEM)
Application according to the listing
- Daihatsu Terios – model
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
Compare number 44510-B4020 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors – a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
