A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat 500X 66065090 52049765
Vendors's code: 52049765
Product code: 66065090
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Fiat 500X 66065090 52049765
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Fiat 500X?
This is a used, working ABS pump with control module for the Fiat 500X - numbers 66065090; 52049765. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat 500X
An ABS pump with control module is one of the key active safety components. This listing applies to: Fiat 500X; the part is used, working and in good condition.
Numbers to compare
- 66065090 - part number (OEM)
- 52049765 - part number (OEM)
- 549031990926 - part number (OEM)
- A001F276 - part number (OEM)
Application according to the listing
- Fiat 500X - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
