A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat 51773386 10020700794
Vendors's code: 51773386
Product code: 10097016033
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Ask about the product
ABS pump and control module Fiat 51773386 10020700794
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Fiat - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Fiat - numbers 51773386; 10.0207-0079.4 / 10020700794. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat
This ABS pump with control module is intended for: Fiat. It is a used, working part in good technical condition.
Numbers to compare
- 51773386 - part number (OEM)
- 10.0207-0079.4 / 10020700794 - ABS pump number (ATE)
- 10.0970-1603.3 / 10097016033 - ABS control module number (ATE)
Application according to the listing
- Fiat - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
The number 51773386 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
