A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Ducato Jumper 51879520 0265260047
Vendors's code: 51879520
Product code: 0265805024
Barcode:
Code 39:
ISBN:
1 463,41 zł
Price
1 463,41 zł
1 800,00 zł
Price
1 800,00 zł
Ask about the product
ABS pump and control module Fiat Ducato Jumper 51879520 0265260047
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 51879520 fit your car?
This is a used, working ABS pump with control module for the Fiat Ducato Jumper - numbers 51879520; 0265260047. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Ducato Jumper
Looking for a replacement for a faulty ABS pump for the Fiat Ducato Jumper? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 51879520 - part number (OEM)
- 0265260047 - ABS pump number (Bosch)
- 0265805024 - ABS control module number (Bosch)
Application according to the listing
- Fiat Ducato Jumper - model
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 51879520 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
