A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Multipla 46511174 0265216525
Vendors's code: 46511174
Product code: A68C-833CF
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Fiat Multipla 46511174 0265216525
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Fiat Multipla?
This is a used, working ABS pump with control module for the Fiat Multipla - numbers 46511174; 0 265 216 525 / 0265216525. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Multipla
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Fiat Multipla (1998-2004); it is used, working and in good condition.
Numbers to compare
- 46511174 - part number (OEM)
- 0 265 216 525 / 0265216525 - ABS pump number (Bosch)
- 0 273 004 253 / 0273004253 - ABS control module number (Bosch)
Application according to the listing
- Fiat Multipla - model
- 1998-2004 - year
- Bosch - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
