A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford E1GC2C405BK F2GC2C219BK
Vendors's code: E1GC2C405BK
Product code: F2GC2C219BK
Barcode:
Code 39:
ISBN:
£138.75
Price
£138.75
£170.66
Price
£170.66
In stock
Ask about the product
ABS pump and control module Ford E1GC2C405BK F2GC2C219BK
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Ford?
This is a used, working ABS pump with control module for the Ford - numbers E1GC-2C405-BK / E1GC2C405BK; F2GC-2C219-BK / F2GC2C219BK. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
An ABS pump with control module is one of the key active safety components. This listing applies to: Ford; the part is used, working and in good condition.
Numbers to compare
- E1GC-2C405-BK / E1GC2C405BK - part number (OEM)
- F2GC-2C219-BK / F2GC2C219BK - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
