A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Explorer 10051181861 F87A2C346BC
Vendors's code: F87A2C219AB
Product code: 10051181861
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Ford Explorer 10051181861 F87A2C346BC
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Ford Explorer - what to check before buying?
This is a used, working ABS pump with control module for the Ford Explorer - numbers 10.0511-8186.1 / 10051181861; F87A-2C346-BC / F87A2C346BC. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Explorer
This ABS pump with control module is intended for: Ford Explorer. It is a used, working part in good technical condition.
Numbers to compare
- 10.0511-8186.1 / 10051181861 - manufacturer number (ATE)
- F87A-2C346-BC / F87A2C346BC - part number (OEM)
- F87A-2C219-AB / F87A2C219AB - part number (OEM)
Application according to the listing
- Ford Explorer - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number 10.0511-8186.1 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
