A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta 4S612M110CD 10020701034
Vendors's code: 4S612M110CD
Product code: 4S612M110CD
Barcode:
Code 39:
ISBN:
£123.33
Price
£123.33
£151.70
Price
£151.70
Ask about the product
ABS pump and control module Ford Fiesta 4S612M110CD 10020701034
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 4S612M110CD - is this the right part?
This is a used, working ABS pump with control module for the Ford Fiesta - numbers 4S61-2M110-CD / 4S612M110CD; 10.0207-0103.4 / 10020701034. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Ford Fiesta. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 4S61-2M110-CD / 4S612M110CD - part number (OEM)
- 10.0207-0103.4 / 10020701034 - ABS pump number (ATE)
- 10.0970-0133.3 / 10097001333 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
