A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta 8V512C405AD 06210214674
Vendors's code: 8V512C405AD
Product code: 06210214674
Barcode:
Code 39:
ISBN:
£138.75
Price
£138.75
£170.66
Price
£170.66
In stock
Ask about the product
ABS pump and control module Ford Fiesta 8V512C405AD 06210214674
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 8V512C405AD fit your car?
This is a used, working ABS pump with control module for the Ford Fiesta - numbers 8V51-2C405-AD / 8V512C405AD; 06.2102-1467.4 / 06210214674. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta
When the ABS in the Ford Fiesta stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 8V51-2C405-AD / 8V512C405AD - part number (OEM)
- 06.2102-1467.4 / 06210214674 - ABS pump number (ATE)
- 06.2109-5619.3 / 06210956193 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta - model
- ATE - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
