A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta 8V512M110AD 06210213174
Vendors's code: 8V512M110AD
Product code: 06210955813
Barcode:
Code 39:
ISBN:
260,16 zł
Price
260,16 zł
320,00 zł
Price
320,00 zł
In stock
Ask about the product
ABS pump and control module Ford Fiesta 8V512M110AD 06210213174
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Ford Fiesta?
This is a used, working ABS pump with control module for the Ford Fiesta - numbers 8V51-2M110-AD / 8V512M110AD; 06.2102-1317.4 / 06210213174. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Ford Fiesta; it is used, working and in good condition.
Numbers to compare
- 8V51-2M110-AD / 8V512M110AD - part number (OEM)
- 06.2102-1317.4 / 06210213174 - ABS pump number (ATE)
- 06.2109-5581.3 / 06210955813 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
