A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta CV212C405EA 10096101983
Vendors's code: CV212C405EA
Product code: 10096101983
Barcode:
Code 39:
ISBN:
£154.16
Price
£154.16
£189.62
Price
£189.62
Ask about the product
ABS pump and control module Ford Fiesta CV212C405EA 10096101983
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Ford Fiesta - what to check before buying?
This is a used, working ABS pump with control module for the Ford Fiesta - numbers CV21-2C405-EA / CV212C405EA; 10.0961-0198.3 / 10096101983. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta
When the ABS in the Ford Fiesta stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- CV21-2C405-EA / CV212C405EA - part number (OEM)
- 10.0961-0198.3 / 10096101983 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
