A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta Fusion 4S612M110AC 10097001333
Vendors's code: 4S612M110AC
Product code: 10097001333
Barcode:
Code 39:
ISBN:
$166.36
Price
$166.36
$204.62
Price
$204.62
Ask about the product
ABS pump and control module Ford Fiesta Fusion 4S612M110AC 10097001333
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Ford Fiesta Fusion?
This is a used, working ABS pump with control module for the Ford Fiesta Fusion - numbers 4S61-2M110-AC / 4S612M110AC; 10.0207-0086.4 / 10020700864. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta Fusion
This ABS pump with control module is intended for: Ford Fiesta Fusion. It is a used, working part in good technical condition.
Numbers to compare
- 4S61-2M110-AC / 4S612M110AC - part number (OEM)
- 10.0207-0086.4 / 10020700864 - ABS pump number (ATE)
- 10.0970-0133.3 / 10097001333 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta Fusion - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
The number 4S61-2M110-AC also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
