A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus Berlina 98AG2M110CA 5WK8458
Vendors's code: 98AG2M110CA
Product code: 5WK8458
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Ford Focus Berlina 98AG2M110CA 5WK8458
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Ford Focus Berlina?
This is a used, working ABS pump with control module for the Ford Focus Berlina - numbers 98AG-2M110-CA / 98AG2M110CA; 5WK8 458 / 5WK8458. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus Berlina
If the ABS warning light is on in your Ford Focus Berlina (1999-2001) or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 98AG-2M110-CA / 98AG2M110CA - part number (OEM)
- 5WK8 458 / 5WK8458 - part number (OEM)
- 10.0204-0158.4 / 10020401584 - ABS pump number (ATE)
- 10.0948-0105.3 / 10094801053 - ABS control module number (ATE)
Application according to the listing
- Ford Focus Berlina - model
- 1999-2001 - year
- ATE - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
Compare number 98AG-2M110-CA in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
