A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus BV612C405AC 10021205034
Vendors's code: BV612C405AC
Product code: 10096101173
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
In stock
Ask about the product
ABS pump and control module Ford Focus BV612C405AC 10021205034
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module BV612C405AC fit your car?
This is a used, working ABS pump with control module for the Ford Focus - numbers BV61-2C405-AC / BV612C405AC; 10.0212-0503.4 / 10021205034. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus
When the ABS in the Ford Focus stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- BV61-2C405-AC / BV612C405AC - part number (OEM)
- 10.0212-0503.4 / 10021205034 - ABS pump number (ATE)
- 10.0961-0117.3 / 10096101173 - ABS control module number (ATE)
Application according to the listing
- Ford Focus - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
