A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus C-Max 8M512C405AA 10096001273
Vendors's code: 8M512C405AA
Product code: 10096001273
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
In stock
Ask about the product
ABS pump and control module Ford Focus C-Max 8M512C405AA 10096001273
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Ford Focus C-Max - what to check before buying?
This is a used, working ABS pump with control module for the Ford Focus C-Max - numbers 8M51-2C405-AA / 8M512C405AA; 10.0960-0127.3 / 10096001273. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus C-Max
Looking for a replacement for a faulty ABS pump for the Ford Focus C-Max? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 8M51-2C405-AA / 8M512C405AA - part number (OEM)
- 10.0960-0127.3 / 10096001273 - ABS control module number (ATE)
- 28560004033 - ABS control module number (ATE)
Application according to the listing
- Ford Focus C-Max - model
- ATE - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
