A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus C-Max BV612C405AF 10021207234
Vendors's code: BV612C405AF
Product code: 10096101403
Barcode:
Code 39:
ISBN:
£107.91
Price
£107.91
£132.73
Price
£132.73
Ask about the product
ABS pump and control module Ford Focus C-Max BV612C405AF 10021207234
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Ford Focus C-Max?
This is a used, working ABS pump with control module for the Ford Focus C-Max - numbers BV61-2C405-AF / BV612C405AF; 10.0212-0723.4 / 10021207234. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus C-Max
According to the listing, this hydraulic unit with electronics fits the Ford Focus C-Max. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- BV61-2C405-AF / BV612C405AF - part number (OEM)
- 10.0212-0723.4 / 10021207234 - ABS pump number (ATE)
- 10.0961-0140.3 / 10096101403 - ABS control module number (ATE)
Application according to the listing
- Ford Focus C-Max - model
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
