A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus C-Max BV612C405AJ 10021208904
Vendors's code: BV612C405AJ
Product code: 10096101943
Barcode:
Code 39:
ISBN:
£107.91
Price
£107.91
£132.73
Price
£132.73
Ask about the product
ABS pump and control module Ford Focus C-Max BV612C405AJ 10021208904
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module BV612C405AJ fit your car?
This is a used, working ABS pump with control module for the Ford Focus C-Max - numbers BV61-2C405-AJ / BV612C405AJ; 10.0212-0890.4 / 10021208904. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus C-Max
Looking for a replacement for a faulty ABS pump for the Ford Focus C-Max? We offer a used, working unit with electronics in good condition.
Numbers to compare
- BV61-2C405-AJ / BV612C405AJ - part number (OEM)
- 10.0212-0890.4 / 10021208904 - ABS pump number (ATE)
- 10.0961-0194.3 / 10096101943 - ABS control module number (ATE)
Application according to the listing
- Ford Focus C-Max - model
- ATE - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
Compare number BV61-2C405-AJ in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
