A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford G1FC2C405AE G1FC2C219BB
Vendors's code: G1FC2C219BB
Product code: G1FC2C405AE
Barcode:
Code 39:
ISBN:
£246.66
Price
£246.66
£303.39
Price
£303.39
In stock
Ask about the product
ABS pump and control module Ford G1FC2C405AE G1FC2C219BB
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Ford - what to check before buying?
This is a used, working ABS pump with control module for the Ford - numbers G1FC-2C405-AE / G1FC2C405AE; G1FC-2C219-BB / G1FC2C219BB. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Ford. The part is used, working and in good condition.
Numbers to compare
- G1FC-2C405-AE / G1FC2C405AE - part number (OEM)
- G1FC-2C219-BB / G1FC2C219BB - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
Customers Also Viewed
-
Price £455.09Price £369.99
