A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford GR3C2C405BD GR3C2C219BD
Vendors's code: GR3C2C219BD
Product code: GR3C2C405BD
Barcode:
Code 39:
ISBN:
£123.33
Price
£123.33
£151.70
Price
£151.70
In stock
Ask about the product
ABS pump and control module Ford GR3C2C405BD GR3C2C219BD
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Ford?
This is a used, working ABS pump with control module for the Ford - numbers GR3C-2C405-BD / GR3C2C405BD; GR3C-2C219-BD / GR3C2C219BD. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
In the Ford, the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- GR3C-2C405-BD / GR3C2C405BD - part number (OEM)
- GR3C-2C219-BD / GR3C2C219BD - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
