A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford GV612C405CJ GV612C219DJ
Vendors's code: GV612C219DJ
Product code: GV612C405CJ
Barcode:
Code 39:
ISBN:
$415.89
Price
$415.89
$511.55
Price
$511.55
In stock
Ask about the product
ABS pump and control module Ford GV612C405CJ GV612C219DJ
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Ford - what to check before buying?
This is a used, working ABS pump with control module for the Ford - numbers GV61-2C405-CJ / GV612C405CJ; GV61-2C219-DJ / GV612C219DJ. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Ford; it is used, working and in good condition.
Numbers to compare
- GV61-2C405-CJ / GV612C405CJ - part number (OEM)
- GV61-2C219-DJ / GV612C219DJ - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
