A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford H1BC2B373GB 10091701663
Vendors's code: H1BC2B373GB
Product code: 10091701663
Barcode:
Code 39:
ISBN:
$166.36
Price
$166.36
$204.62
Price
$204.62
Ask about the product
ABS pump and control module Ford H1BC2B373GB 10091701663
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number H1BC2B373GB - is this the right part?
This is a used, working ABS pump with control module for the Ford - numbers H1BC-2B373-GB / H1BC2B373GB; 10.0917-0166.3 / 10091701663. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
In the Ford, the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- H1BC-2B373-GB / H1BC2B373GB - part number (OEM)
- 10.0917-0166.3 / 10091701663 - ABS control module number (ATE)
Application according to the listing
- Ford - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
The number H1BC-2B373-GB also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
Customers Also Viewed
-
Price $255.77Price $207.95
