A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford J1GC2B373BF J1GC2C219BF
Vendors's code: J1GC2B373BF
Product code: J1GC2C219BF
Barcode:
Code 39:
ISBN:
$332.71
Price
$332.71
$409.24
Price
$409.24
In stock
Ask about the product
ABS pump and control module Ford J1GC2B373BF J1GC2C219BF
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number J1GC2B373BF - is this the right part?
This is a used, working ABS pump with control module for the Ford - numbers J1GC-2B373-BF / J1GC2B373BF; J1GC-2C219-BF / J1GC2C219BF. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
Looking for a replacement for a faulty ABS pump for the Ford? We offer a used, working unit with electronics in good condition.
Numbers to compare
- J1GC-2B373-BF / J1GC2B373BF - part number (OEM)
- J1GC-2C219-BF / J1GC2C219BF - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
