A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford J7BC2B373AE J7BC2C219AE
Vendors's code: J7BC2B373AE
Product code: J7BC2C219AE
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
In stock
Ask about the product
ABS pump and control module Ford J7BC2B373AE J7BC2C219AE
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number J7BC2B373AE - is this the right part?
This is a used, working ABS pump with control module for the Ford - numbers J7BC-2B373-AE / J7BC2B373AE; J7BC-2C219-AE / J7BC2C219AE. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
An ABS pump with control module is one of the key active safety components. This listing applies to: Ford; the part is used, working and in good condition.
Numbers to compare
- J7BC-2B373-AE / J7BC2B373AE - part number (OEM)
- J7BC-2C219-AE / J7BC2C219AE - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
