A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Jaguar S-Type 10051181861 XW432C333AF
Vendors's code: XW432C219AD
Product code: XW432C333AF
Barcode:
Code 39:
ISBN:
$103.97
Price
$103.97
$127.89
Price
$127.89
In stock
Ask about the product
ABS pump and control module Ford Jaguar S-Type 10051181861 XW432C333AF
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Ford Jaguar S-Type?
This is a used, working ABS pump with control module for the Ford Jaguar S-Type - numbers 10.0511-8186.1 / 10051181861; XW43-2C333-AF / XW432C333AF. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Jaguar S-Type
According to the listing, this hydraulic unit with electronics fits the Ford Jaguar S-Type (1999-2000). It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 10.0511-8186.1 / 10051181861 - manufacturer number (ATE)
- XW43-2C333-AF / XW432C333AF - part number (OEM)
- XW43-2C219-AD / XW432C219AD - part number (OEM)
Application according to the listing
- Ford Jaguar S-Type - model
- 1999-2000 - year
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
The number 10.0511-8186.1 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
