A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Kuga CV612C405AH 10021209584
Vendors's code: 10096101693
Product code: CV612C405AH
Barcode:
Code 39:
ISBN:
£92.50
Price
£92.50
£113.77
Price
£113.77
In stock
Ask about the product
ABS pump and control module Ford Kuga CV612C405AH 10021209584
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Ford Kuga?
This is a used, working ABS pump with control module for the Ford Kuga - numbers CV61-2C405-AH / CV612C405AH; 10.0212-0958.4 / 10021209584. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Kuga
When the ABS in the Ford Kuga stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- CV61-2C405-AH / CV612C405AH - part number (OEM)
- 10.0212-0958.4 / 10021209584 - ABS pump number (ATE)
- 10.0961-0169.3 / 10096101693 - ABS control module number (ATE)
Application according to the listing
- Ford Kuga - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
