A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford M1BC2B373CB M1BC2C219CB
Vendors's code: M1BC2B373CB
Product code: M1BC2C219CB
Barcode:
Code 39:
ISBN:
731,71 zł
Price
731,71 zł
900,00 zł
Price
900,00 zł
In stock
Ask about the product
ABS pump and control module Ford M1BC2B373CB M1BC2C219CB
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Ford?
This is a used, working ABS pump with control module for the Ford - numbers M1BC-2B373-CB / M1BC2B373CB; M1BC-2C219-CB / M1BC2C219CB. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
This ABS pump with control module is intended for: Ford. It is a used, working part in good technical condition.
Numbers to compare
- M1BC-2B373-CB / M1BC2B373CB - part number (OEM)
- M1BC-2C219-CB / M1BC2C219CB - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
Customers Also Viewed
-
Price 1 600,00 złPrice 1 300,81 zł
-
Price 1 200,00 złPrice 975,61 zł
-
Price 800,00 złPrice 650,41 zł
-
Price 1 800,00 złPrice 1 463,41 zł
