A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Mondeo 3S712M110AA 0265222030
Vendors's code: 3S712M110AA
Product code: 0265800014
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Ford Mondeo 3S712M110AA 0265222030
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Ford Mondeo?
This is a used, working ABS pump with control module for the Ford Mondeo - numbers 3S71-2M110-AA / 3S712M110AA; 0 265 222 030 / 0265222030. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Mondeo
According to the listing, this hydraulic unit with electronics fits the Ford Mondeo. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 3S71-2M110-AA / 3S712M110AA - part number (OEM)
- 0 265 222 030 / 0265222030 - ABS pump number (Bosch)
- 0 265 800 014 / 0265800014 - ABS control module number (Bosch)
Application according to the listing
- Ford Mondeo - model
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
