A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Mondeo S-Max AG912C405FA AG9114C036FA
Vendors's code: AG912C405FA
Product code: 6E99-549FA
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Ford Mondeo S-Max AG912C405FA AG9114C036FA
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number AG912C405FA - is this the right part?
This is a used, working ABS pump with control module for the Ford Mondeo S-Max - numbers AG91-2C405-FA / AG912C405FA; AG91-14C036-FA / AG9114C036FA. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Mondeo S-Max
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Ford Mondeo S-Max. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- AG91-2C405-FA / AG912C405FA - part number (OEM)
- AG91-14C036-FA / AG9114C036FA - part number (OEM)
- 16565807 - part number (OEM)
Application according to the listing
- Ford Mondeo S-Max - model
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
