A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Ranger GB3C2C405AC 0265258805
Vendors's code: GB3C2C405AC
Product code: 0265956421
Barcode:
Code 39:
ISBN:
$187.15
Price
$187.15
$230.20
Price
$230.20
In stock
Ask about the product
ABS pump and control module Ford Ranger GB3C2C405AC 0265258805
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ford Ranger - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Ford Ranger - numbers GB3C-2C405-AC / GB3C2C405AC; 0265258805. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Ranger
When the ABS in the Ford Ranger stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- GB3C-2C405-AC / GB3C2C405AC - part number (OEM)
- 0265258805 - ABS pump number (Bosch)
- 0265956421 - ABS control module number (Bosch)
Application according to the listing
- Ford Ranger - model
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
