A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Transit Bosch 0265295681 NK312B373AG 0265957123
Vendors's code: NK312B373AG
Product code: 0265957123
Barcode:
Code 39:
ISBN:
$412.81
Price
$412.81
$507.76
Price
$507.76
Ask about the product
ABS pump and control module Ford Transit Bosch 0265295681 NK312B373AG 0265957123
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.47
-
shipping
(Poland)
from
$30.47
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Ford Transit?
This is a used, working ABS pump with control module for the Ford Transit - numbers NK312B373AG / NK31-2B373-AG; 0265295681 / 0 265 295 681; 0265957123 / 0 265 957 123. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Transit
This ABS pump with control module is intended for: Ford Transit. It is a used, working part in good technical condition.
Numbers to compare
- NK312B373AG / NK31-2B373-AG - part number (OEM)
- 0265295681 / 0 265 295 681 - ABS pump number (Bosch)
- 0265957123 / 0 265 957 123 - ABS control module number (Bosch)
Application according to the listing
- Ford Transit - model
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
Compare part number NK31-2B373-AG including the final letters, because they distinguish the module versions. Numbers 0265295681 and 0265957123 are the Bosch markings of the pump and control module.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Do the brakes need bleeding after replacement? |
|---|
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
