A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Transit Mondeo YC152M110AE 0265216577
Vendors's code: YC152M110AE
Product code: 229C-60855
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ford Transit Mondeo - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Ford Transit Mondeo - numbers YC15-2M110 AE / YC152M110AE; 0 265 216 577 / 0265216577. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Transit Mondeo
This ABS pump with control module is intended for: Ford Transit Mondeo (2000-2006). It is a used, working part in good technical condition.
Numbers to compare
- YC15-2M110 AE / YC152M110AE - part number (OEM)
- 0 265 216 577 / 0265216577 - ABS pump number (Bosch)
Application according to the listing
- Ford Transit Mondeo - model
- 2000-2006 - year
- Bosch - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
Compare number YC15-2M110 AE in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.