A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Hyundai Kia 589202E500 BH60133440
Vendors's code: 589202E500
Product code: 5WY7610E
Barcode:
Code 39:
ISBN:
£246.66
Price
£246.66
£303.39
Price
£303.39
Ask about the product
ABS pump and control module Hyundai Kia 589202E500 BH60133440
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Hyundai Kia - what to check before buying?
This is a used, working ABS pump with control module for the Hyundai Kia - numbers 58920-2E500 / 589202E500; BH60133440. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Hyundai Kia
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Hyundai Kia. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 58920-2E500 / 589202E500 - part number (OEM)
- BH60133440 - part number (OEM)
- 5WY7610E - part number (OEM)
Application according to the listing
- Hyundai Kia - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
