A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Hyundai Kia Coupe Tiburon 589202C600 BH60106900
Vendors's code: 589202C600
Product code: 5WY7417A
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
Ask about the product
ABS pump and control module Hyundai Kia Coupe Tiburon 589202C600 BH60106900
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Hyundai Kia Coupe Tiburon?
This is a used, working ABS pump with control module for the Hyundai Kia Coupe Tiburon - numbers 58920-2C600 / 589202C600; BH60106900. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Hyundai Kia Coupe Tiburon
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Hyundai Kia Coupe Tiburon; the unit is working and in good condition.
Numbers to compare
- 58920-2C600 / 589202C600 - part number (OEM)
- BH60106900 - part number (OEM)
- 5WY7417A - part number (OEM)
Application according to the listing
- Hyundai Kia Coupe Tiburon - model
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
Compare number 58920-2C600 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
